specification control drawing te connectivity 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: soldersleeve devices shield termination with pre-installed braid unless otherwise specified dimensions are in millim eters. [inches dimensions are shown in brackets] document no.: s03-01/-05-r tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. prod. rev.: see table doc. issue: 5 date: 15-apr-11 drawn by: m. foronda cage code: 06090 replaces: d982098 dcr number: d030251 scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision. ? 2011 tyco electronics corporation, a te connectiv ity ltd. company. all rights reserved. product revision component dimensions shall accommo date cable with dimensions product name ident. code l ? 1.75 (l ? 0.070) ?b min ?c min h min ?e max ?f min ?d max S03-01-R d s0301r 16.50 (0.650) 1.90 (0.070) 2.65 (0.105) 8.25 (0.325) 2.65 (0.105) 0.90 (0.035) 1.90 (0.075) s03-02-r d s0302r 16.50 (0.650) 2.65 (0.105) 3.68 (0.145) 8.25 (0.325) 3.68 (0.140) 1.40 (0.055) 2.65 (0.105) s03-03-r d s0303r 16.50 (0.650) 4.30 (0.170) 5.08 (0.200) 8.25 (0.325) 5.08 (0.200) 2.15 (0.085) 4.30 (0.170) s03-04-r d s0304r 19.10 (0.750) 5.95 (0.235) 6.45 (0.255) 8.25 (0.325) 6.45 (0.255) 3.30 (0.130) 5.95 (0.235) s03-05-r d s0305r 19.10 (0.750) 7.00 (0.275) 7.60 (0.300) 8.25 (0.325) 7.60 (0.300) 4.30 (0.170) 7.00 (0.275) materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinyliden e fluoride. 2. solder preform with flux and thermal indicator solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: color change violet to colo rless. 3. meltable rings: stabilized thermoplastic. color: blue. 4. pre-installed braid: tin-plated copper strands. cma 640. application 1. these parts are designed to provide an environme nt protected shield termination on cables, rated fo r 125 ? c minimum, meeting the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material. for compatible insulations, see mil-s-83519/2 o r consult te connectivity/raychem. 2. when installed per te connectivity /raychem proc ess standard rcps-100-70, assemblies will meet thos e requirements of te connectivity /raychem specification rt-1404 and mil-s-83519/2, which do not require electrical testing while parts are immersed in water. 3. temperature range: -55 ? c to +150 ? c. 4. parts shall be marked with identification code p er table. for best results, prepare the cable as shown: soldersleeve is a trademark of te connectivity.
|
